PD Hardware Adjustable Standard Duty Bevel Edges 135-Degree Glass to Glass Shower Hinges have taken our popular Standard Duty Bevel Edges Shower  Hinges (PSH-300 Series Hinges) to a new level. Adjustment to accommodate the desired angle (up to 90º) is done after the door is installed. Once the door is hung, simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-center to the desired angle. The door can swing 90º inward and also 90º outward (adjusting angle from factory set position will reduce 90º swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5º inside the shower area, thus having the door close snugly against the jamb.

Finishes: Chrome, Brushed Nickel, Matte Black, ORB, PVD Gold, etc.

Glass Thickness: 5/16" to 1/2" (8 mm to 12 mm) Tempered Glass

Hinge Swings: Opening Inwards and Outwards

Closing Type: Self-Centering from 15 Degrees

“Mouse-ears” Glass Cut-Out

Material: Full Solid Brass

Using two hinges hold up to 80 lbs/36 kg. with a max. door width of 28”/711 mm

Using three hinges hold up to 120 lbs/54 kg. with a max. door width of 32”/813 mm

Wall Mount Hinge with Internal 5 Degree Pin is Available