Prodiamonds Hardware Adjustable Heavy Duty 90-Degree Glass to Glass Shower Hinge has taken our popular Heavy Duty Shower Hinge (PSH-701 Series Hinge) to a new level. Adjustment to accommodate the desired angle (up to 90 degrees) is done after the door is hung. Simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-center to the desired closed position. The door can swing 90 degrees inward and 90 degrees outward (adjusting angle from factory set position will reduce 90 degree swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degrees inside the shower area, thus having the door close snugly against the jamb.

Material: Full Solid Brass

Thickness: 3/8” (10 mm) to 1/2” (12 mm) Glass

Hinge Swings: Opening inwards and outwards

Closing Type: Self-Centering When Within 15°

“Mouse-ears” Glass Cut-Out and Square Glass Cut-Out

Finishes: Chrome, Brushed Nickel, Matte Black, PVD Gold, etc.

Using two hinges hold up to 110 lbs/50 kg. with a max. door width of 36”/914 mm

Using three hinges hold up to 140 lbs/63 kg. with a max. door width of 36”/914 mm

Factory Set for Standard Closing Position

Wall Mount Hinge with Internal 5 Degree Pin is Available